What To Know
- Place the repeater in a location that is between the existing router and the area where you need extended coverage.
- The range of the RT-N12 as a repeater will depend on the signal strength of the existing Wi-Fi network and the placement of the repeater.
- Can I use the RT-N12 as a main router instead of a repeater.
Extending the reach of your Wi-Fi network is crucial for seamless connectivity throughout your home or office. One cost-effective way to achieve this is by utilizing an existing router as a wireless repeater. In this comprehensive guide, we’ll delve into the step-by-step process of setting up your ASUS RT-N12 router as a repeater, ensuring reliable and extended Wi-Fi coverage.
Prerequisites
Before embarking on the setup process, ensure you have the following:
- ASUS RT-N12 router
- Ethernet cable
- Access to the existing Wi-Fi network (SSID and password)
Step 1: Factory Reset
Begin by factory resetting your RT-N12 router to its default settings. Locate the reset button on the back of the router and press and hold it for 10 seconds. Release the button once the power LED starts blinking.
Step 2: Connect to the Router
Using an Ethernet cable, connect your computer or laptop to one of the LAN ports on the RT-N12 router.
Step 3: Open the Web Interface
Launch a web browser and type “192.168.1.1” in the address bar. This will open the ASUS router‘s web-based management interface.
Step 4: Log In
Enter the default username and password for the router (both are “admin”).
Step 5: Navigation Menu
Click on the “Administration” tab and select “Operation Mode” from the left-hand navigation menu.
Step 6: Select Repeater Mode
Under “Operation Mode,” select “Repeater.” This will enable the RT-N12 to extend the range of an existing Wi-Fi network.
Step 7: Wireless Settings
Scroll down to the “Wireless” section and enable the “Enable Wireless” option. Select the SSID (network name) and password of the existing Wi-Fi network you want to repeat.
Step 8: Save and Apply
Click on the “Apply” button at the bottom of the page to save your changes. The RT-N12 router will now begin searching for the existing Wi-Fi network and establish a connection.
Step 9: Position the Repeater
Once the connection is established, unplug the Ethernet cable from the RT-N12 router. Place the repeater in a location that is between the existing router and the area where you need extended coverage. Avoid placing the repeater too close to the existing router or any other electronic devices that may interfere with the signal.
Success!
Congratulations! You have successfully set up your ASUS RT-N12 router as a repeater. You can now enjoy extended Wi-Fi coverage and improved connectivity throughout your space.
Troubleshooting Tips
If you encounter any issues during the setup process or experience connectivity problems, here are a few troubleshooting tips:
- Ensure that the existing Wi-Fi network is broadcasting on the 2.4 GHz band, as the RT-N12 only supports this frequency.
- Check that the SSID and password of the existing network are correct.
- Try moving the repeater closer to the existing router to improve signal strength.
- Reset the RT-N12 router and repeat the setup process.
Questions We Hear a Lot
Q: What is the range of the ASUS RT-N12 router when used as a repeater?
A: The range of the RT-N12 as a repeater will depend on the signal strength of the existing Wi-Fi network and the placement of the repeater. However, it typically extends the coverage by 30-50 feet.
Q: Can I use the RT-N12 as a main router instead of a repeater?
A: Yes, the RT-N12 can be used as both a main router and a repeater. To configure it as a main router, select “Router” mode in the Operation Mode settings.
Q: How do I know if the RT-N12 is successfully repeating the Wi-Fi signal?
A: You can check the status of the repeater in the router’s web interface under the “Wireless” tab. It should display the SSID and connection status of the existing Wi-Fi network.
