What To Know
- Use a paperclip or a similar thin object to press and hold the reset button for approximately 10-15 seconds.
- If you don’t have access to the reset button or web-based interface, you can use the default settings to reset the router.
- If the reset button is not working, try using a toothpick or a similar sharp object to press it.
Experiencing issues with your ASUS RT-N14UHP router? A factory reset can often resolve various problems and restore your device to optimal performance. This comprehensive guide will provide you with step-by-step instructions on how to reset your ASUS RT-N14UHP router, ensuring a seamless and efficient process.
Method 1: Reset Button
1. Locate the Reset Button: The reset button is typically located on the back or bottom of the router. It may be a small, recessed button labeled “Reset” or “Restore.”
2. Press and Hold the Button: Use a paperclip or a similar thin object to press and hold the reset button for approximately 10-15 seconds. The router’s lights will blink or flash during this time.
3. Release the Button: Once the router’s lights stop blinking, release the reset button. The router will now begin the factory reset process.
Method 2: Web-Based Interface
1. Access the Router’s Interface: Connect your computer to the router’s network via Wi-Fi or an Ethernet cable. Open a web browser and enter the router’s IP address (typically 192.168.1.1) into the address bar.
2. Log In: Enter the router’s username and password (usually “admin” for both).
3. Navigate to the Reset Page: Click on the “Administration” or “System” tab and look for a section labeled “Restore” or “Reset.”
4. Initiate the Reset: Click on the “Restore” or “Reset” button and confirm your action. The router will begin the factory reset process.
Method 3: Default Settings
If you don’t have access to the reset button or web-based interface, you can use the default settings to reset the router.
1. Unplug the Router: Disconnect the power cable from the router.
2. Press and Hold the WPS Button: While the router is unplugged, press and hold the WPS button for approximately 5 seconds.
3. Plug in the Router: While holding the WPS button, plug the power cable back into the router.
4. Release the Button: Keep holding the WPS button for another 10-15 seconds after plugging in the router.
5. Wait for Reset: The router’s lights will blink or flash during the reset process. Once the lights stop blinking, release the WPS button.
Post-Reset Configuration
After resetting the router, you will need to reconfigure its settings, including:
- Wi-Fi network name (SSID) and password
- Internet connection settings (DHCP or static IP)
- Port forwarding rules
- Firewall settings
Troubleshooting Reset Issues
If you encounter any issues during the reset process, try the following troubleshooting steps:
- Ensure that the power cable is securely connected to the router.
- Try using a different web browser or device to access the router’s interface.
- If the reset button is not working, try using a toothpick or a similar sharp object to press it.
- If the router is still not resetting, contact ASUS support for assistance.
Summary: A Fresh Start for Your ASUS RT-N14UHP Router
By following the instructions outlined in this guide, you can successfully reset your ASUS RT-N14UHP router and restore it to its factory default settings. This process will resolve many common issues and improve the router’s performance. Remember to reconfigure the router’s settings after the reset to ensure optimal functionality.
Frequently Asked Questions
Q: How long does it take to reset the ASUS RT-N14UHP router?
A: The reset process typically takes around 1-2 minutes.
Q: Will resetting the router delete my Wi-Fi settings?
A: Yes, resetting the router will erase all custom settings, including Wi-Fi network name, password, and any port forwarding rules.
Q: Can I reset the router remotely?
A: No, you cannot reset the router remotely without physical access to the device.
