What To Know
- Using a switch puller (if available) or a small flathead screwdriver, gently pry the two plastic clips away from the switch.
- If you’re replacing the switches, align the new Razer Green switches with the corresponding holes on the PCB.
- If a switch is not registering input, clean the metal pins and PCB contacts with a cotton swab dipped in isopropyl alcohol.
Razer Green switches are known for their tactile and clicky feedback, making them a popular choice for gamers and typists alike. However, if you’re looking to replace or repair your Razer keyboard, you’ll need to know how to remove the Green switches. Here’s a comprehensive step-by-step tutorial to guide you through the process.
Materials You’ll Need:
- Phillips head screwdriver
- Keycap puller
- Switch puller (optional)
- New Razer Green switches (if replacing)
Step 1: Disconnect and Disassemble the Keyboard
- Unplug the keyboard from your computer.
- Remove all keycaps using a keycap puller.
- Flip the keyboard upside down and locate the screws securing the backplate.
- Use a Phillips head screwdriver to remove the screws and carefully lift off the backplate.
Step 2: Locate the Switches
- Once the backplate is removed, you’ll see the Razer Green switches installed on the PCB (printed circuit board).
- Each switch is held in place by two plastic clips and two metal pins.
Step 3: Remove the Switch Clips
- Using a switch puller (if available) or a small flathead screwdriver, gently pry the two plastic clips away from the switch.
- Be careful not to damage the clips or the PCB.
Step 4: Lift the Switch
- Once the clips are released, carefully lift the switch straight up and out of the PCB.
- The metal pins should slide out of their corresponding holes.
Step 5: Remove the Metal Pins (Optional)
- If you’re not replacing the switches, you can skip this step.
- To remove the metal pins, gently use a pair of tweezers to pull them out of the PCB.
- Be cautious not to bend or damage the pins.
Step 6: Install the New Switches (Optional)
- If you’re replacing the switches, align the new Razer Green switches with the corresponding holes on the PCB.
- Gently press down on the switches until they click into place.
- Ensure the metal pins are fully inserted and secured.
Step 7: Reassemble the Keyboard
- Place the backplate back onto the keyboard and secure it with the screws.
- Reattach the keycaps using the keycap puller.
- Connect the keyboard to your computer and test the functionality of the new switches.
Troubleshooting:
- If a switch doesn’t click into place, check if the metal pins are properly aligned and inserted.
- If a switch is loose or wobbly, make sure the plastic clips are securely fastened.
- If a switch is not registering input, clean the metal pins and PCB contacts with a cotton swab dipped in isopropyl alcohol.
Final Thoughts: A Hassle-Free Switch Removal
Removing Razer Green switches is a straightforward process that can be completed in a few simple steps. By following this comprehensive tutorial, you can easily replace or repair your Razer keyboard switches, ensuring optimal performance and durability.
Frequently Asked Questions
Q: Can I remove Razer Green switches without a switch puller?
A: Yes, you can use a small flathead screwdriver to gently pry the switch clips away. However, a switch puller is recommended for a more convenient and safer removal.
Q: Can I replace Razer Green switches with other types of switches?
A: Razer Green switches are compatible with Razer keyboards designed for mechanical switches. However, it’s important to verify the compatibility of specific switch types before replacing them.
Q: How often should I replace Razer Green switches?
A: The lifespan of Razer Green switches is typically rated for 80 million keystrokes. The actual replacement frequency depends on the frequency and intensity of use.
