What To Know
- If you want to connect the printer to your network, plug an Ethernet cable from your router into the Ethernet port on the back of the printer.
- Press and hold the “Cancel” button on the printer for about 5 seconds until the “Reset” message appears on the LCD screen.
- Adjust the paper guides in the paper tray to match the size of the paper you’re using.
Are you a proud owner of the Brother HL-L2370DW printer and eager to get it up and running? Installing this versatile device can seem daunting, but with our step-by-step guide, you’ll be printing documents effortlessly in no time.
Unboxing and Preparation
1. Unbox the Printer: Carefully remove the printer from the box and place it on a stable surface.
2. Remove Packaging: Remove all protective packaging materials, including the plastic bag and foam inserts.
3. Install Toner Cartridge: Open the front cover of the printer and insert the toner cartridge into the designated slot. Ensure it clicks into place.
4. Connect Power Cable: Plug the power cable into the back of the printer and then into a power outlet.
Software Installation
1. Download Drivers: Visit the Brother website and download the latest drivers for your specific operating system.
2. Run Installation Wizard: Double-click on the downloaded file to launch the installation wizard. Follow the on-screen instructions to complete the software installation.
3. Add Printer: Once the software is installed, open the Printers & Scanners settings on your computer. Click on “Add a Printer” and select the Brother HL-L2370DW from the list.
Network Setup (Optional)
1. Connect Ethernet Cable: If you want to connect the printer to your network, plug an Ethernet cable from your router into the Ethernet port on the back of the printer.
2. Configure Network Settings: Access the printer’s web interface by typing its IP address into a web browser. Navigate to the Network Settings page and configure the network parameters.
Paper Loading
1. Open Paper Tray: Open the paper tray at the bottom of the printer.
2. Adjust Paper Guides: Slide the paper guides to the appropriate width of the paper you’re using.
3. Load Paper: Insert the paper into the tray, making sure it’s aligned straight. Adjust the paper guides to hold the paper in place.
Printing a Test Page
1. Open Printer Properties: Right-click on the Brother HL-L2370DW printer in the Printers & Scanners settings and select “Printer Properties.”
2. Print Test Page: Click on the “Print Test Page” button in the General tab. The printer will print a test page to verify its functionality.
Troubleshooting Common Issues
- Printer Not Detected: Ensure the power cable is securely connected and the printer is turned on. Check the USB cable or Ethernet cable if you’re using a wired connection.
- Print Quality Issues: Replace the toner cartridge if it’s running low or damaged. Clean the printer rollers to remove any debris that may be affecting print quality.
- Network Connectivity Problems: Check the Ethernet cable and ensure it’s securely connected to both the printer and router. Reset the printer’s network settings if necessary.
Final Thoughts: Empowering Your Workflow
With your Brother HL-L2370DW printer successfully installed, you’re now equipped to elevate your productivity and streamline your document handling. Enjoy the convenience of seamless printing and leverage its advanced features to enhance your workflow.
Basics You Wanted To Know
Q: How do I reset the printer to factory settings?
A: Press and hold the “Cancel” button on the printer for about 5 seconds until the “Reset” message appears on the LCD screen.
Q: Can I print from my mobile device?
A: Yes, you can download the Brother Mobile Connect app to print wirelessly from your smartphone or tablet.
Q: How do I change the paper size?
A: Adjust the paper guides in the paper tray to match the size of the paper you’re using. You can also specify the paper size in the printer properties settings.
