What To Know
- This comprehensive guide will walk you through the steps on how to go to BIOS on your Surface Laptop.
- The arrow keys will allow you to move through the different options in the BIOS menu.
- When you have made the necessary changes, press F10 to save your settings and exit the BIOS.
The BIOS (Basic Input/Output System) is a crucial component of your Surface Laptop, providing low-level control over hardware and boot settings. Accessing the BIOS can be necessary for troubleshooting, updating firmware, or tweaking hardware configurations. This comprehensive guide will walk you through the steps on how to go to BIOS on your Surface Laptop.
Powering Off and On
1. Power off your Surface Laptop: Press and hold the power button for a few seconds until the screen turns off.
2. Wait for 5 seconds: Allow the laptop to completely power down.
Booting to the UEFI Firmware Settings
1. Press the Volume Up and Power buttons simultaneously: Hold both buttons down until the Surface logo appears on the screen.
2. Release the buttons: Once you see the Surface logo, release both the Volume Up and Power buttons.
3. Wait for the UEFI Firmware Settings screen to load: This may take a few seconds.
Navigating the BIOS
1. Use the arrow keys to navigate: The arrow keys will allow you to move through the different options in the BIOS menu.
2. Press Enter to select: Once you have highlighted an option, press Enter to select it.
3. Press F10 to save and exit: When you have made the necessary changes, press F10 to save your settings and exit the BIOS.
Common BIOS Settings
- Boot Order: Change the order in which your Surface Laptop attempts to boot from different devices.
- Security: Enable or disable security features such as password protection and Secure Boot.
- Date and Time: Set the current date and time.
- Hardware Configuration: View and modify hardware settings such as memory, storage, and fan speed.
Advanced BIOS Options
- UEFI Boot Mode: Switch between UEFI and Legacy boot modes.
- Virtualization Support: Enable or disable virtualization technologies such as Hyper-V.
- PXE Boot: Configure network boot settings.
- TPM: Manage the Trusted Platform Module (TPM) chip for enhanced security.
Troubleshooting BIOS Access
- If you cannot access the BIOS: Try holding down the Volume Up and Power buttons for longer. You may also need to connect an external keyboard.
- If the BIOS settings are not saved: Make sure to press F10 to save your changes before exiting the BIOS.
- If the BIOS is corrupted: You may need to reset the BIOS to its default settings.
The Bottom Line: Mastering BIOS Access
Accessing the BIOS on your Surface Laptop can empower you with control over your hardware and boot settings. By following the steps outlined in this guide, you can confidently navigate the BIOS and make the necessary adjustments. Remember to carefully consider your changes and save your settings before exiting to avoid any potential issues.
Popular Questions
Q: Can I access the BIOS without a keyboard?
A: Yes, you can use the Volume Up and Power buttons to access the BIOS.
Q: Why does my Surface Laptop not boot into the BIOS?
A: Ensure that you are holding down the Volume Up and Power buttons long enough. You may also need to try connecting an external keyboard.
Q: How do I reset the BIOS to its default settings?
A: Remove the battery and CMOS battery from your Surface Laptop. Press and hold the power button for 30 seconds. Reinsert the batteries and restart your laptop.
