What To Know
- To do this, insert a T5 Torx screwdriver into the screw located at the bottom of the kickstand.
- Disassembling the Surface Pro 4 is a relatively simple process, but it is important to follow the instructions carefully to avoid damaging the device.
- Yes, you can disassemble your Surface Pro 4 yourself, but it is important to follow the instructions carefully to avoid damaging the device.
The Surface Pro 4 is a powerful and versatile device that can be used for a variety of tasks. However, if you need to repair or replace a component, you’ll need to know how to disassemble it. In this comprehensive guide, we’ll walk you through the entire process step by step, so you can get your Surface Pro 4 back up and running in no time.
Tools You’ll Need
Before you start, you’ll need to gather the following tools:
- T5 Torx screwdriver
- T3 Torx screwdriver
- Phillips #00 screwdriver
- Spudger
- Suction cup
Safety Precautions
Before you begin disassembling your Surface Pro 4, be sure to take the following safety precautions:
- Power down the device and unplug it from any power source.
- Remove any peripherals, such as the keyboard and pen.
- Place the device on a flat, stable surface.
- Wear anti-static gloves to prevent electrostatic discharge (ESD).
Step-by-Step Disassembly Instructions
1. Remove the Kickstand
Start by removing the kickstand. To do this, insert a T5 Torx screwdriver into the screw located at the bottom of the kickstand. Turn the screw counterclockwise to loosen it, then remove the screw and kickstand.
2. Remove the Bottom Cover
Next, remove the bottom cover. To do this, insert a T3 Torx screwdriver into each of the four screws located around the perimeter of the bottom cover. Turn each screw counterclockwise to loosen it, then remove the screws and bottom cover.
3. Disconnect the Battery
Once the bottom cover is removed, you’ll need to disconnect the battery. To do this, locate the battery connector on the motherboard. It is a small, black connector with two wires attached to it. Use a spudger to gently pry the connector loose from the motherboard.
4. Remove the Motherboard
Now, you can remove the motherboard. To do this, locate the four screws that secure the motherboard to the chassis. Use a T5 Torx screwdriver to remove the screws, then carefully lift the motherboard out of the chassis.
5. Remove the LCD Assembly
The next step is to remove the LCD assembly. To do this, locate the two screws that secure the LCD assembly to the chassis. Use a T3 Torx screwdriver to remove the screws, then carefully lift the LCD assembly out of the chassis.
6. Remove the Battery
Now, you can remove the battery. To do this, locate the two screws that secure the battery to the chassis. Use a T5 Torx screwdriver to remove the screws, then carefully lift the battery out of the chassis.
7. Reassemble the Surface Pro 4
Once you have replaced the component you needed to, you can reassemble the Surface Pro 4 by following the steps in reverse order.
Troubleshooting Tips
If you encounter any problems while disassembling or reassembling your Surface Pro 4, try the following troubleshooting tips:
- Make sure that you are using the correct tools and screws.
- Be careful not to overtighten the screws.
- If you are having trouble removing a screw, try using a little bit of penetrating oil.
- If you are having trouble disconnecting a connector, try using a spudger to gently pry it loose.
Takeaways
Disassembling the Surface Pro 4 is a relatively simple process, but it is important to follow the instructions carefully to avoid damaging the device. By following the steps outlined in this guide, you can safely disassemble and reassemble your Surface Pro 4, and get it back up and running in no time.
Information You Need to Know
1. How do I know if my Surface Pro 4 needs to be disassembled?
There are a few signs that your Surface Pro 4 may need to be disassembled, such as:
- The device is not turning on.
- The screen is cracked or damaged.
- The battery is not charging.
- The device is overheating.
2. Can I disassemble my Surface Pro 4 myself?
Yes, you can disassemble your Surface Pro 4 yourself, but it is important to follow the instructions carefully to avoid damaging the device.
3. How long will it take to disassemble my Surface Pro 4?
The time it takes to disassemble your Surface Pro 4 will vary depending on your experience and the tools you have available. However, you should be able to complete the process in about 30 minutes.
