What To Know
- In the HP Smart app, tap the “+” icon to add a printer.
- Connect one end of the Ethernet cable to the Ethernet port on the printer.
- Yes, you can connect the printer to a mobile hotspot by following the same steps as connecting to a Wi-Fi network.
Are you struggling to connect your HP OfficeJet Pro 8710 printer to your wireless network? Don’t worry; this step-by-step guide will provide you with all the necessary instructions to ensure a seamless wireless connection.
Prerequisites
Before you begin, ensure you have the following:
- HP OfficeJet Pro 8710 printer
- Wireless router
- Internet access
- Ethernet cable (optional)
Connecting via the HP Smart App
Download and Install HP Smart App
1. Go to the Apple App Store (for iOS) or Google Play Store (for Android).
2. Search for “HP Smart” and download the app.
3. Install and launch the app on your device.
Set Up Printer
1. In the HP Smart app, tap the “+” icon to add a printer.
2. Select “Wireless” as the connection type.
3. Follow the on-screen instructions to complete the printer setup.
Connecting via the HP Printer Assistant
Download and Install HP Printer Assistant
1. Go to the HP website and download the HP Printer Assistant software.
2. Install the software on your computer.
3. Launch the HP Printer Assistant.
Add Printer
1. In the HP Printer Assistant, click on “Add a Printer.”
2. Select “Wireless” as the connection type.
3. Follow the on-screen instructions to complete the printer setup.
Connecting via the Wireless Setup Wizard
Access Wireless Setup Wizard
1. On the printer control panel, press the “Wireless” button.
2. Select “Wireless Setup Wizard.”
Connect to Network
1. The printer will search for available wireless networks.
2. Select your wireless network from the list.
3. Enter the network password when prompted.
Connecting via Ethernet Cable (Optional)
Connect Ethernet Cable
1. Connect one end of the Ethernet cable to the Ethernet port on the printer.
2. Connect the other end of the cable to an available Ethernet port on your router.
Configure Wireless Connection
1. On the printer control panel, press the “Wireless” button.
2. Select “Ethernet to Wireless.”
3. The printer will automatically configure the wireless connection.
Troubleshooting
Printer Not Found
- Ensure the printer is powered on and connected to the same network as your device.
- Restart the printer and try connecting again.
- If using the HP Smart app, check if location services are enabled on your device.
Connection Drops
- Check if there is any interference from other electronic devices.
- Move the printer closer to the router.
- Update the printer firmware.
Slow Printing
- Check if the printer is set to “Normal” print quality.
- Reduce the number of copies being printed.
- Clear the printer queue and restart the print job.
What You Need to Learn
Can I connect the printer to both Wi-Fi and Ethernet?
Yes, you can connect the printer to both Wi-Fi and Ethernet simultaneously. However, the printer will prioritize the Ethernet connection over Wi-Fi.
How do I change the printer’s wireless password?
1. Access the printer’s embedded web server (EWS) by entering its IP address into a web browser.
2. Navigate to the “Network” tab.
3. Select “Wireless” and then “Security.”
4. Enter the new password and click “Apply.”
Can I connect the printer to a mobile hotspot?
Yes, you can connect the printer to a mobile hotspot by following the same steps as connecting to a Wi-Fi network.
