How To Clear Cmos Gigabyte Aorus

The Complementary Metal-Oxide-Semiconductor (CMOS) is a small chip on your Gigabyte AORUS motherboard that stores crucial system settings, including the date, time, and hardware configurations. Occasionally, these settings may become corrupted or outdated, leading to system instability or boot-up issues. In such cases, clearing the CMOS can resolve these problems and restore stability to your motherboard. This guide will provide a step-by-step walkthrough on how to clear CMOS on Gigabyte AORUS motherboards.

Prerequisites

Before proceeding, ensure you have gathered the following:

• Anti-static wrist strap
• Non-metallic tweezers or needle-nose pliers
• Jumper cap (optional)

Step-by-Step Instructions

1. Power Down and Unplug

• Turn off your computer and disconnect it from the power outlet.
• Discharge any residual electricity by holding the power button for a few seconds.

2. Locate the Clear CMOS Jumper

• On Gigabyte AORUS motherboards, the Clear CMOS jumper is typically labeled “CLR_CMOS” or “CLEAR CMOS.”
• Refer to your motherboard’s user manual for the exact location.

3. Remove the Jumper Cap

• Use the tweezers or needle-nose pliers to gently remove the jumper cap from the pins.

4. Wait 5-10 Seconds

• Leave the jumper pins exposed for 5-10 seconds to allow the CMOS to clear its settings.

5. Replace the Jumper Cap

• Reinstall the jumper cap onto the pins to restore the default CMOS settings.

6. Power On and Reset

• Reconnect your computer to the power outlet and turn it on.
• Enter the BIOS setup menu (usually by pressing “Del” or “F2” during boot-up) and reset the BIOS settings to their default values.

Alternative Method: Using the CMOS Battery

Some Gigabyte AORUS motherboards allow you to clear the CMOS by removing the CMOS battery instead of using the jumper.

1. Remove the CMOS Battery

• Locate the CMOS battery on your motherboard (usually a small, round battery).
• Gently pry the battery out of its socket using a non-metallic object.

2. Wait 15-20 Minutes

• Leave the motherboard without the CMOS battery for 15-20 minutes.

3. Replace the CMOS Battery

• Reinsert the CMOS battery into its socket.

4. Power On and Reset

• Follow steps 6 from the previous method to power on your computer and reset the BIOS settings.

Troubleshooting

• No Boot After Clearing CMOS: Ensure the jumper cap is correctly installed or the CMOS battery is properly seated.
• Incorrect BIOS Settings: Reset the BIOS settings to their default values after clearing the CMOS.
• Persistent CMOS Corruption: The CMOS chip may be faulty and require replacement.

Final Thoughts

By following the steps outlined above, you can effectively clear the CMOS on your Gigabyte AORUS motherboard. This procedure is crucial for resolving system instability or boot-up issues caused by corrupted or outdated CMOS settings. Remember to exercise caution when handling the motherboard and its components to avoid any damage.

Frequently Asked Questions

Q: How often should I clear the CMOS?
A: Clearing the CMOS is generally only necessary when experiencing system instability or boot-up problems.

Q: Can I clear the CMOS without the jumper cap?
A: Yes, you can use the alternative method described in this guide, which involves removing the CMOS battery.

Q: What are the consequences of clearing the CMOS?
A: Clearing the CMOS resets all BIOS settings to their default values, including the date, time, and hardware configurations.

Q: Will clearing the CMOS erase my files?
A: No, clearing the CMOS only affects the system settings stored on the CMOS chip and does not affect data stored on your hard drive.

Q: What if clearing the CMOS doesn‘t resolve my issue?
A: If clearing the CMOS does not solve the problem, you may need to troubleshoot other hardware components or consult a qualified technician.