What To Know
- Use a cotton swab dipped in isopropyl alcohol to clean the electrical contacts on the toner cartridge and inside the printer.
- The corona wire is a thin wire located inside the printer, near the toner cartridge.
- As a general rule, clean the printer every 3-6 months or when you notice a decline in print quality.
Are you experiencing printing issues with your Brother HL-L2370DW printer? It might be time for a deep clean. Cleaning your printer regularly can help prevent paper jams, improve print quality, and extend the lifespan of your device. This comprehensive guide will walk you through every step on how to clean Brother HL-L2370DW, ensuring your printer runs smoothly and efficiently.
Materials You’ll Need
Before you start cleaning, gather the following materials:
- Soft, lint-free cloth
- Isopropyl alcohol (70% or higher)
- Cotton swabs
- Compressed air can (optional)
Cleaning the Exterior
1. Unplug the printer: Always unplug the printer before cleaning to prevent electrical shock.
2. Wipe the exterior: Using a soft, lint-free cloth, gently wipe down the exterior surfaces of the printer, removing any dust or debris.
3. Clean the control panel: Use a cotton swab dipped in isopropyl alcohol to clean the control panel buttons and display. Avoid using excessive moisture.
Cleaning the Paper Path
1. Open the front cover: Open the front cover of the printer to expose the paper path.
2. Remove any paper or debris: Check for any jammed paper or debris in the paper tray and remove it carefully.
3. Clean the rollers: Use a soft, lint-free cloth to clean the paper feed rollers and pickup rollers. Remove any excess toner or paper dust.
Cleaning the Toner Cartridge
1. Open the toner cartridge door: Open the toner cartridge door on the front of the printer.
2. Remove the toner cartridge: Grasp the toner cartridge by its handle and pull it straight out.
3. Clean the contacts: Use a cotton swab dipped in isopropyl alcohol to clean the electrical contacts on the toner cartridge and inside the printer.
4. Reinstall the toner cartridge: Carefully insert the toner cartridge back into the printer until it clicks into place.
Cleaning the Fuser Unit
1. Turn off the printer and unplug it: Allow the printer to cool down completely before cleaning the fuser unit.
2. Open the rear cover: Open the rear cover of the printer to expose the fuser unit.
3. Clean the fuser roller: Use a soft, lint-free cloth to clean the fuser roller. Avoid touching the hot roller with your bare hands.
Cleaning the Corona Wire
1. Locate the corona wire: The corona wire is a thin wire located inside the printer, near the toner cartridge.
2. Clean the corona wire: Use a cotton swab dipped in isopropyl alcohol to clean the corona wire. Be careful not to bend or damage the wire.
Cleaning the Laser Scanner
1. Open the scanner unit: Open the scanner unit on the top of the printer.
2. Clean the laser scanner: Use a compressed air can to blow away any dust or debris from the laser scanner. Avoid touching the scanner with your hands.
Troubleshooting Common Cleaning Issues
- Printer still not printing properly: If you’re still experiencing printing issues after cleaning, there may be a more serious problem. Contact Brother support for assistance.
- Toner smudges or streaks on prints: This could indicate that the fuser unit is not heating up properly. Check the fuser unit and replace it if necessary.
- Paper jams: If you’re experiencing frequent paper jams, check for any debris or damage in the paper path. Clean the rollers and paper tray thoroughly.
Wrap-Up
Regular cleaning is essential for maintaining the performance and longevity of your Brother HL-L2370DW printer. By following the steps outlined in this guide, you can ensure your printer operates smoothly and produces high-quality prints for years to come. Remember to unplug the printer before cleaning and use appropriate materials to avoid damaging any components.
What You Need to Know
Q: How often should I clean my Brother HL-L2370DW printer?
A: Cleaning frequency depends on usage. As a general rule, clean the printer every 3-6 months or when you notice a decline in print quality.
Q: Can I use water to clean my printer?
A: No, never use water to clean your printer. Water can damage the electrical components and void your warranty.
Q: Where can I find replacement parts for my Brother HL-L2370DW printer?
A: You can purchase genuine Brother replacement parts from authorized retailers or the Brother website.
